Wisdomlong Technology CO.，LTD
Wisdomlong Technology CO.，LTD
Add to Cart
GE IC695CRU320 CPU module supports Up to 64 MB of battery-backed RAM and 64 MB of non-volatile flash user memory
Product information GE IC695CRU320 :
The IC695CRU320 is a Redundancy Processor from the PACSystems RX3i product family. This processor is manufactured by GE Fanuc / Emerson automation that is categorized as Programmable Automation Controllers (PAC).
The IC695CRU320 is especially used in redundant or hot-standby configuration. With this controller configuration, availability is significantly increased. Two (2) controller racks with similar configuration functions as Primary (active) and Secondary (stand-by) rack.
When a single rack has failed, primarily due to errors detected by the IC695CRU320 or error of the IC695CRU320 processor itself, active controller duty is automatically transferred to the secondary (stand-by). The secondary rack becomes the primary and the failed rack shift to secondary rack. Additionally, manual switchover is possible.
Controller switchover is performed in Maximum of 1 logic scan with minimum switchover time of 3.133 msec. It supports up to IC695RMX128/228 synchronization links and capable of transferring up to 2Mbytes of data.
With the Celeron M processor with 1GHz processing speed and 64MB user memory, this controller is ideally used in large and complex applications with increased level of criticality. Additionally, up to 512 program blocks may be saved to this processor which each block size may reach up to 128 KB.
The IC695CRU320 processor is installed to an RX3i backplane, directly to the Peripheral Component Interconnect (PCI) slot. Other module connections to the bus are also through the PCI 2.2 version or higher.
This PCI slot enables rapid transfer and sharing of data within the backplane. The IC695CRU320 also supports Series 90-30 I/O modules for phased migration.
Description of IC695CRU320 :
IC695CRU320 is a PACSystem RX3i Redundancy Processor. This module occupies Two slots, Celeron M with processor speed of 1GHz. This processor has a switchover time of Maximum 1 logic scan, minimum 3.133 msec.
It supports Up to 64 MB of battery-backed RAM and 64 MB of non-volatile flash user memory. has Two serial communication ports supporting RS232 and RS485 communication standards.
In the Feature( IC695CRU320) :
▪ Hot standby (HSB) redundancy. Two redundant units make up a redundancy system. Each unit requires one Redundancy CPU (IC695CRU320) and a redundancy Memory Xchange module (IC695RMX128/228) configured as a redundancy link.
▪Contains 64 Mbytes of battery-backed user memory and 64 Mbytes of non-volatile flash user memory.
▪ Provides access to bulk memory via reference table %W.
▪ Configurable data and program memory.
▪ Programming in Ladder Diagram, Structured Text, Function Block Diagram, and C. Refer to PACSystems RX7i & RX3i CPU Programmer’s
Reference Manual, GFK-2950.
▪ Supports auto-located Symbolic Variables that can use any amount of user memory.
▪ Reference table sizes include 32Kbits for discrete %I and %Q and up to 32K words each for analog %AI and %AQ.
▪ Supports most Series 90-30 modules and expansion racks. For a list of supported I/O, Communications, Motion, and Intelligent modules, refer to the PACSystems RX3i System Manual, GFK-2314F or later.
▪ Supports up to 512 program blocks. Maximum size for a block is 128KB.
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.