51400955-100 PROCESSOR CONTROL BOARD DCS PROCESS NETWORK INTERFACE BOARD

FC-SAI-1620m ANALOG CARD 0(4)-20 MA INPUT 16 CHANNEL Digital I O Module

Quick Details

• 51400955100
• DISCONTINUED BY MANUFACTURER
• PROCESSOR CONTROL BOARD
• DCS PROCESS NETWORK INTERFACE BOARD
• MULTI INPUT/OUTPUT
• PANEL MOUNT
• FACTORY WARRANTY MAY NOT APPLY. RADWELL 2-YEAR WARRANTY INCLUDED

OTHER SUPERIOR PRODUCTS

The 7800 series are microprocessor-based industrial burner controls for automatically fired gas, oil or combination fuel single burner applications. The 7800-series are enabled for remote monitoring via the Thermal IQ Honeywell Connected Plant solution. For all type of burners with unlimited capacity.

Features & Benefits:

• Approvals:
  • CE approved according EN 298 for continuous operation (when used with correct flame amplifier and flame sensor). EU models only
  • SIL-3 Capable certified. All models, except EC/RM7823 flame switches
  • APAVE accepted. EU models only
  • CSA/UL approved. US models only
• Protection class:
  • Europe: IP00 (cabinet mount only)
  • Americas: NEMA 1 (cabinet or wall mount)
• Ambient temperature -40 to 60°C
• Maximum humidity 85 %rh
• Failure Response Times (FFRT)
  • European 7800-series burner controllers (EU): 1.0 or 2.0s (depends on flame amplifier model)
  • American 7800-series burner controllers (US): 0.8 or 3.0s (depends on flame amplifier model).
• Flame detector Depends on plug-in amplifier
• Modular design with plug-in modules.
• Selectable pre-purge time by ST7800A1xxx/U module selection
• Accepts all existing Honeywell optical flame detectors and flame rods
• All information regarding the burner control (6 last lockout conditions, flame signal, hours of operation ...) are available on the keyboard display module or through communication