
Add to Cart
AB 1606-XLE120E Essential Power Supply 24-28V DC Output Voltage Single Phase
About 1606-XL120E :
Output:
1606-XLE120E AC/DC Essential Power Supply 24-28V DC Output Voltage, 5A, 120W, Single Phase, 120/230V AC Input Voltage, Standard Module, DINRail mount, Series A
Output noise suppression:
Radiated EMI values below EN50081-1, even when using long, unscreened output cables
Ambient temperature range Tamb:
Operation: -10°C...+70°C (>60°C: Derating) Storage: -25°C...+85°C
Instructions:
a) Use appropriate copper cables that are designed for an operating temperature of: 60°C for ambient up to 45°C and 75°C for ambient up to 60°C minimum.
b) Follow national installation codes and installation regulations!
c) Ensure that all strands of a stranded wire enter the terminal connection!
d) Up to two stranded wires with the same cross section are permitted in one connection point (except PE wire).
e) Do not use the unit without PE connection.
1606-XLE120E & 1606-XLE120EC 24V, 5A; Single Phase Input
Above an average output current of 2.7A, the harmonic current standard EN61000-3-2 is not fulfilled.
Please note:
A power supply has to comply with EN 61000-3-2 (Standard for harmonic input current) when:
1) the end-device is used within the European Union and
2) the end-device is connected to a public mains supply with a nominal voltage ≥ 220Vac and
3) the power supply is:
- fitted in an end-device with an average input power in excess of 75W or
- fitted in an end-device with a continuous input power in excess of 75W or
- part of a lighting system.
More information:
Nominal value output voltage 1 | 24 V |
Secondary voltage adjustable | Yes |
Max. output current 1 | 5 A |
Nominal value output current 1 | 5 A |
Power output | 120 W |
Voltage type of supply voltage | AC/DC |
1st secondary output voltage | 24 V |
Rated supply voltage at AC 50 Hz | 100 V |
Rated supply voltage at AC 60 Hz | 100 V |
Rated supply voltage at DC | 110 V |
Power reserves | 20 % |
Derating | 3 W/°C |
DC OK relay contact | Yes |
Input inrush current limiter | Active |
Adjustment range | 24 V |
Power factor | 0.91 typical |
Operational range | 90…132V AC |
Rated output current | 5 A, 24V |
External input fuse, min | B-6 A or C-6 A |
Power losses | 7.3 W typical |
Sub group | Essential line |
Hold-up time | >80 ms @ 120V |
Efficiency | 94.3% typical |
Input inrush current | 4 A/3 A |
Special family function | Dynamic 120% power boost under 45C Degree |
Rated input current | 2.6 A, 100V AC |
Output voltage stabilized | Yes |
Rail mounting possible | Yes |
Stabilized | Yes |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.