Wisdomlong Technology CO.，LTD
Wisdomlong Technology CO.，LTD
Add to Cart
GE IC693ALG223 RX3i Analog Current Input Module that offers 16 channels 90-30 Series
Product information GE IC693ALG223 :
The IC693ALG223 Module is a 16-channel analog current input module manufactured by GE Fanuc as part of the Series 90-30 product line. This module comes with 16 single-ended input channels that are designed to convert between different supported current ranges or to convert the analog signals to digital PLC signals. The module has an isolation voltage of 1500 Volts between its field side and logic side, and this helps to eliminate the ground loops within the communication lines.
The GE Fanuc IC693ALG223 Analog Current Input Module provides 3 input current ranges which are 4 to 20 milliamps, 0 to 20 milliamps and 4 to 20 milliamps. This unit has been tested and engineered to operate with the GE Series 90-30 PLCs, and it operates on a nominal current of 65 milliamps at 24 Volts DC of voltage from the external power supply that provides the system with loop currents.
The GE Fanuc IC693ALG223 16-Channel Analog Input Module comes with an input filter response frequency of 200 Hertz and an input impedance of 250 Ohms. The total number of analog current inputs that can be installed in the system is 4 along with the 323, 313, and 311 CPUs, and 8 analog current inputs can be installed with the 331 CPU, and 12 inputs can be installed with the 341and 340 CPUs. This unit comes with a high level of resolution and accuracy that helps it to deal with analog signals that are highly sensitive.
The module also receives analog inputs from a wide range of sensors like the level sensors, temperature sensors, and flow sensors. For the IC693ALG223 Analog Input Module to achieve the needed accuracy level, the input channels come with resolution of 4 microamps at 4 to 20 milliamps of current, and a resolution of 5 microamps at 0 to 20 milliamps.
More information:
| Number of Channels | 1 to 16 selectable; single-ended |
| Input Current Ranges | 0 to 20 mA, 4 to 20 mA and 4 to 20 mA Enhanced (selectable per channel) |
| Calibration | Factory calibrated to: 4 μA per count on 4 to 20 mA range 5 μA per count on 0 to 20 mA and 4 to 20 mA Enhanced range |
| Update Rate | Update Rate: 6 ms |
| Resolution at 4–20 mA | 4 μA (4 μA/bit) |
| Resolution at 0–20 mA | 5 μA (5 μA/bit) |
| Resolution at 4–20 mA Enhanced | 5 μA (5 μA/bit) |
| Absolute Accuracy 1 | ±0.25% of full scale @ 25°C (77°F): ± 0.5% of full scale over specified operating temperature range |
| Linearity | < 1 LSB from 4 to 20 mA (4 to 20 mA range) < 1 LSB from 100 μA to 20 mA (0 to 20 mA and 4 to 20 mA Enhanced ranges) |
| Isolation, Field to Backplane (optical) and to frame ground | 250 VAC continuous; 1500 VAC for 1 minute |
| Common Mode Voltage2 | 0 volts (single-ended channels) |
| Cross–Channel Rejection | > 70dB from DC to 1kHz |
| Input Impedance | 250 W |
| Input Low Pass Filter Response | 19 Hz |
| External Supply Voltage Range | 20 to 30 VDC |
| External Supply Voltage Ripple | 10% |
| Internal Power Consumption | 120 mA from the +5 VDC bus on the backplane 65 mA from 24 VDC external user power supply (in addition to current loop currents) |
| IC694MDL230 | 120 VAC Isolated Input (8 Points) |
| IC694MDL231 | 240 VAC Isolated Input (8 Points) |
| IC694MDL240 | 120 VAC Input (16 Points) |
| IC694MDL241 | 24 VAC/VDC Input (16 Points) |
| IC694MDL250 | 120 VAC Isolated Input (16 Points) |
| IC694MDL260 | 120 VAC Input (32 Points)** |
| IC694MDL632 | 125 VDC Input (8 Points) |
| IC694MDL634 | 24 VDC Input, Neg/Pos Logic (8 Points) |
| IC694MDL645 | 24 VDC Input, Neg/Pos Logic (16 Points) |
| IC694MDL646 | 24 VDC Input, Neg/Pos Logic, 1 msec Filter (16 Points) |
| IC694MDL654 | 5/12 VDC (TTL) Input, Neg/Pos Logic, (32 Points) |
| IC694MDL655 | 24 VDC Input, Neg/Pos Logic, 1 ms, (32 Points) |
| IC694MDL660 | 24 VDC Input (32 Points)** |
| IC694ACC300 | Input Simulator Module (8 Points) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.