Wisdomlong Technology CO.，LTD
Wisdomlong Technology CO.，LTD
Add to Cart
GE IC697BEM711 0.8 Amps and the module also requires 5 Volts DC input voltage
Product information GE IC693PBM200 :
The GE Fanuc Series 90-30 Programmable Logic Controller (PLC) module with catalog number IC693ALG223 is a Sixteen (16) channels, single ended, analog input module that is used to interface field devices and instrument that provide analog signals as representation to measurement of process variable.
The IC697BEM711 module is a bus receiver module. Features of the IC697BEM711 module include a high-speed parallel bus expansion interface, support for 7 expansion racks, system fault isolation, easy software configuration, and support for holding the machine's last state. Three LED indicators on the module provide the status of the module as well as the bus expansion port status and expansion status. By using the IC697BEM711 module, expansion to up to a maximum of 7 additional IC697 PLC racks can be achieved by using a total of 15 meters of cable.
The IC697BEM711 module takes up one slot in the PLC chassis. Two connectors are provided on the module's front panel: one connector is used to connect with the upstream or CPU rack and the other connector is used to connect to additional expansion racks through a daisy chain arrangement.
CPUs
| IC695CPU320 | 1 GHz CPU, 64 Mbytes of memory, two serial ports |
| IC695CPU310 | 300 MHz CPU, 10 Mbytes of memory, two serial ports (requires 2 slots) |
| IC695CRU320 | Redundant High Availability bumpless 1 GHz CPU, |
| IC695CMU310 | Redundant Hot Standby 300 MHz CPU, 10 Mbytes of memory,two serial ports |
| Catalog Number | Description |
| IC693MDL310 | 120 VAC Output, 0.5 Amp (12 Points) |
| IC693MDL330 | 120/240 VAC Output, 1 Amp (8 Points) |
| IC693MDL340 | 120 VAC Output, 0.5 Amp (16 Points) |
| IC693MDL350 | 120 VAC Isolated Output, 2 Amp (16 Points) |
| IC693MDL390 | 120/240 VAC Isolated Output, 2 Amp (5 Points) |
| IC693MDL730 | 12/24 VDC Output, 2 Amp, Positive Logic (8 Points) |
| IC693MDL731 | 12/24 VDC Output, 2 Amp, Negative Logic (8 Points) |
| IC693MDL732 | 12/24 VDC Output, 0.5 Amp, Positive Logic (8 Points) |
| IC693MDL733 | 12/24 VDC Output, 0.5 Amp, Negative Logic (8 Points) |
| IC693MDL734 | 125 VDC Output, (6 Points) |
| IC693MDL740 | 12/24 VDC Output, 0.5 Amp, Positive Logic (16 Points) |
| IC693MDL741 | 12/24 VDC Output, 0.5 Amp, Negative Logic (16 Points) |
| IC693MDL742 | 12/24 VDC Output, 1 Amp, Positive Logic (16 Points), Fused |
| IC693MDL748 | 48/24 VDC Output, 0.5 Amps, Positive Logic (8 Points) |
| IC693MDL752 | 5/24 VDC (TTL) Output, Negative Logic, (32 Points) |
| IC693MDL753 | 12/24 VDC Output, Positive Logic (32 Points) |
| IC693MDL754 | 12/24 VDC Output, 0.75 amps, Pos Logic with ESCP protection, (32 Points). |
| Catalog Number | IC693PBM200 |
| Description | Series 90-30 Master module for PROFIBUS DP networks |
| Configuration Software Requirement | Proficy™ Machine Edition Logic Developer version 2.6 or later |
| CPU Version Requirement | CPU firmware version 8.00 or later |
| Mounting Location | Any Series 90-30 baseplate (CPU, expansion, or remote) slot except slot 1 of a modular CPU baseplate |
| Environment | Storage temperature = -40ï‚°C to 85ï‚°C Operating temperature = 0ï‚°C to 60ï‚°C |
| Backplane Current Consumption | 450mA @ 5VDC (typical) |
| Data rates | Supports all standard data rates (9.6K, 19.2K, 93.75K, 187.5K, 500K, 1.5M, 3M, 6M and 12M Baud) |
| Status Information Available | Slave Status Bit Array Slave Diagnostics/Firmware ID array Network diagnostic counters DP master diagnostic counters Firmware module revision Slave Diagnostic Address |
PACSystems RX3i Features:
• High-speed processor and patented technology for faster throughput without information bottlenecks
• Dual backplane bus support per module slot:
- High-speed, PCI-based for fast through put of new advanced I/O
- Serial backplane for easy migration of existing Series 90-30 I/O
• Multiple CPU offerings meeting various performance criteria up to and includ-ing an Intel ® 1 GHz CPU for advanced programming and performance with 64 Mbytes memory
• Memory for ladder logic documentation and machine documentation (Word, Excel, PDF, CAD and other files) in the controller to reduce downtime and improve troubleshooting
| Module Type: | Bus Receiver |
| Eff. Data Rate: | 500 Kbytes/sec |
| Allowed Distance of Cable: | 50 feet |
| Discrete Points Available: | N/A |
| Serial Ports: | 2 |
| Current Required: | 0.8 Amps |
| IC695PSA140 | Multipurpose Power Supply, 120/240 VAC, 125 VDC 40 Watts |
| IC695PSA040 | Power Supply, 120/240 VAC, 125 VDC, 40 Watts (requires 2 slots) |
| IC695PSD140 | Multipurpose Power Supply, 24 VDC, 40 Watts |
| IC695PSD040 | Power Supply, 24 VDC, 40 Watts (requires 1 slot) |
Remote Base Power Supplies
| IC693PWR332 | Power Supply, 12 VDC, Standard, 30 Watts (Use with Expansion Base) |
| IC693PWR328 | Power Supply, 48 VDC, Standard, 30 Watts (Use with Expansion Base) |
Our brand:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.