PSE300-600-70-1 1SFA897114R7001 PSE300 Softstarter 50/60Hz New

PSE300-600-70-1 1SFA897114R7001 PSE300 Softstarter 50/60Hz New

The softstarter PSE300-600-70-1 has a rated maximum operational current of 300 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug.

Product Information Of : PSE300 600 70 1

General info :

Article number : 1SFA897114R7001

Catalog Description : PSE300-600-70-1 Softstarter - 300 A - 208 ... 600 V AC

Type Designation : PSE300-600-70-1

Product Main Type : PSE300

Invoice Description : PSE300 Softstarter 1SFA897114R7001

Minimum Order Quantity : 1 piece

Technical :

Rated Operational Voltage : 208 ... 600 V AC

Rated Control Supply Voltage (Us) : 100 ... 250 V AC

Rated Control Circuit Voltage (Uc) : 24 V DC

Rated Frequency (f) : 50/60 Hz
Main Circuit 50 / 60 Hz

Analog Outputs : 4…20 mA

Maximum Operating Voltage UL/CSA : Main Circuit 600 V

Tightening Torque UL/CSA : Control Circuit 4.4 in·lb
Main Circuit 247.8
Supply Circuit 4.4 in·lb

Protection Function :
Electronic overload protection, EOL;

Locked rotor protection;

Current underload protection

Categories :

Products » Drives » Softstarters » Softstarters » PSE Softstarters » PSE300
Products » Low Voltage Products and Systems » Control Products » Softstarters » Softstarters » PSE Softstarters » PSE300

OTHER SUPERIOR PRODUCTS

What does "stirring up the market" mean, and why should it be avoided?
Stirring up the market is what happens when many different suppliers are all contacted regarding the same part. It makes other suppliers believe the part is in much higher demand than it might actually be, resulting in raised prices and lower availability. In order to prevent this costly outcome,WTL highly recommends limiting the number of potential suppliers you reach out to for rare parts.

What forms of payment are accepted?
We accept all major credit cards (Visa, MasterCard, American Express, and Discover). We also accept wire transfers and PayPal. Checks will only be accepted from customers in the USA. For large orders from repeat customers, terms may be granted pending qualification.

How will shipped to me?
We generally ship via FedEx, UPS, DHL, and USPS, and we are more than happy to use your preferred carrier or account. We do ship to international (non-USA) customers, as well.

What is the estimated lead time ?
The primary factor in lead time for the MODEL is availability. If we do not currently have the MODEL in our inventory, we will check with our trusted suppliers for stock. Services such as repair or refurbishment could affect lead time, as well.

Good Service in WTL:

> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor and Servo Drive.

> Please send your RFQ to get the latest price.

> Normally, we will ship the items in 1-2 weeks after receive the payment.

> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.

> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate.

If needed, please contact us for specific prices.